Factory Defaults - Avery Dennison ADTP1 System Administrator Manual

Factory Defa ults
If you reset the Ethernet/W ireless module to factory defaults, the following values are
restored. Some settings may stay the same, depending on your network
configuration.
Description
MAC Address
IP Address
Subnet Mask
IP Gateway
Signal Strength
SSID
Wireless Mode
Roam Threshold
Transmit Rate
Channel
Boot Method
Boot Tries
TCP/IP
TCP Port
LPD
Name
Encryption Mode
Authentication Type
Authentication
Protocol
Regulatory Domain
* May keep previous v alues based on net work configuration.
4-4 System Administrator's Guide
Default
This value is hard-coded and does not change
*
255.255.000.000
*
0
<none>
Infrastructure
6
1
1
DHCP
5
Enabled
9100
Disabled
PXR_xxxxxx (xxxxxx = last six digits of the MAC address.)
Disabled
Open System
PAP
United States
Classification: Avery Dennison - Public