Using A Usb Thumb Drive; Updating The Rfid Inlay Database - Avery Dennison ADTP1 System Administrator Manual

U s i n g a U S B T h u m b D r i v e
Using a USB thumb drive, you can update
Printer bootloader (r46*.bin)
♦
Printer firmware (a46*.bin)
♦
RFID firmware (a84*.bin)
♦
RFID inlay database (d46ES*.db)
♦
The USB thumb drive must be FAT
Only a qualified Service Representative may update the bootloader, printer's firmware,
and RFID firmware.
Updating the RF ID Inla y Database
The printer contains an RFID inlay database (d46ESxx.db). The RFID database is
included with the printer's firmware and does not need to be flashed separately.
However, new inlays may be qualified in between firmware releases. Only inlays qualified
for use in the printer are included. The xx in the filename indicates the revision level of
the database.
To update the RFID Database:
1. Create an ADTP folder on your thumb drive.
2. Download the necessary file (d46ESxx.db) from our website.
3. Save the file to the ADTP folder on your thumb drive.
4. Turn on the printer. When you see "Ready", insert the thumb drive into the USB port.
5. Press MENU and use  or  to select the Setup menu, USB Drive.
6. Press ENTER and use  or  and select the RFID Database file.
7. Press SELECT.
6-12 System Administrator's Guide
32 format.
Classification: Avery Dennison - Public