Table of Contents
Advertisement
MFC 4550/6550MC/7550MC
OP-US-5.0
GETTING STARTED
9. MESSAGE CENTER MODE SETTINGS
(Only for MFC 6550MC/7550MC)
A)
GETTING
What Is the Message Center Mode?
The Message Center Mode allows you to store the incoming fax/voice messages into
a flexible memory. Fax Retrieval, Paging and Fax Forwarding features are available
in this mode.
The Message Center is a built-in fax and voice message answering device to more
effectively manage your voice and fax messages, while you are out.
This flexible memory can be used for voice messages, fax messages or a combination
that stores both types on a first come, first served basis. Any fax or voice message that
is stored in the memory can be retrieved from a remote location.
Your Message Center has a total capacity of 15 minutes of voice messages (30 minutes
for MFC 7550MC) or 30 pages of fax messages (70 pages for MFC 7550MC). The
memory on your machine can be expanded.
The Fax and F/T lights must be lit to turn on Message Center Mode.
N O T E : The Message Center outgoing message (OGM) must be
recorded before you can activate the message center mode.
What Do I Want the Message Center to Do?
There are six of ways to allocate the flexible Message Center memory, depending upon
which best fits your needs.
You may have to use only one mode on a regular basis, but periodically change modes
to meet high or low message days. The six modes are as follows:
The factory setting is FAX: OFF/VOICE: ON.
MESSAGE CENTER MODE SETTINGS
STARTED
Voice
Fax
status
Record
Erase
Play
9 - 1
Advertisement
Table of Contents
Troubleshooting
