Brother MFC-4550 Operation Manual page 144

MFC 4550/6550MC/7550MC
OP-US-5.0
MESSAGE CENTER MODE SETTINGS
10. Enter a PIN (Personal Identifica-tion
Number), #, press Redial/Pause key your
MFC telephone number, and ##.
Example: 12345#-19085551234##.
- If you do not use a PIN, you must enter
the telephone number of your MFC. Press
Redial/Pause key before entering your
fax number and add ## at the end.
Example: -19085551234##
11. Press Set.
1 2. Press Stop to exit.
- Paging number and PIN can not be changed remotely.
- Redial/Pause appears as a hyphen on the display.
The PIN (Personal Identification Number) you enter depends upon the
type of paging company you use. There are generally two types of paging
companies...
1 ) Satellite Pagers: In this case we recommend you enter your actual
satellite PIN# plus your return MFC telephone/fax number/or special
alpha message.
For Example: 12345#19085551234## or 12345#329329329##
2 ) Radio Pagers: Most* radio pagers do not require a PIN #, and in this case
you should use the PIN # in the MFC only for the return number or
special alpha message.
For Example: 19085551234## or 329329329##
* If your radio pager utilizes a PIN # then use the satellite sequence
above.
The "##" symbols at the end of the special message (or return #) are used
to signify the end the PIN #/Message.
9-22
FOR YOUR INFORMATION
PIN# Return#
Return# Alpha Message
FAXFAXFAX
PAGING/FAX FORWARDING
5 # - 1 9 0 8 5 5 5 1 2 3 4 # #
3.FAX FWD/PAGING
PIN# Alpha Message
FAXFAXFAX