Manual Reception (Manual Mode); Automatic Fax Only Reception (Fax Mode); Setting The Ring Delay - Brother MFC-4550 Operation Manual

MFC 4550/6550MC/7550MC
OP-US-5.0
BASIC SETUP TO RECEIVE FAXES

Manual Reception (Manual Mode)

When you set the Answer Mode to manual, you must answer each incoming call
yourself. Here is what you should do when using Manual Mode:
If You Get a...
1 . Regular phone call
2 . Phone call and
request to send a fax
3 . Fax tone...

Automatic Fax Only Reception (Fax Mode)

You can automatically receive all your faxes in Automatic Fax Reception mode (Fax
light is ON). Select this mode by pressing Mode.

Setting the Ring Delay

You can set the number of rings before the MFC will answer the line.
KEYS TO PRESS
1 . Press Function.
(The MFC 4550 will skip to Step 4.)
2 . Wait for two seconds.
(Only for MFC 6550MC/7550MC)
3 . Press 1.
(Only for MFC 6550MC/7550MC)
4 . Press 6.
5 . Press 2.
RECEIVING FAXES AND OTHER CALLS
Then You Should...
Talk as you normally would.
Press Start when finished talking, and replace the
handset.
Note: Sender must also press Start.
Press Start, and replace the handset.
(Only for MFC
6550MC/
7550MC)
(Only for MFC
6550MC/
7550MC)
THE DISPLAY WILL SHOW:
0 9 / 1 2 / 1 9 9 6 1 5 : 2 5
O N L I N E
ENTER NO. & SET
1 . F A X
2 . P R I N T E R
1 . F A X
6 . T E L O P T I O N S
2 . R I N G D E L A Y
R I N G D E L A Y : 0 2
SELECT { } & SET
6 - 2