Test/Reset Key; Print Priority Key - Brother MFC-4550 Operation Manual

MFC 4550/6550MC/7550MC
OP-US-5.0
NOTE
The MFC periodically will print any data remaining in the memory .
<CLEARING
If an error occurs, the machine usually will automatically recover the recoverable
errors, such as a memory full condition. If the error does not clear automatically, press
FF/Cont to clear the error and continue the operation.

Test/Reset Key

<TEST PRINT>
This key is used to print a test sample page. If data remains in the printer memory,
press On/OffLine to turn the printer offline and press Test/Reset. The MFC will
print the remaining data first and then will print a test sample page. To print the
printer status lists, see page 10-12 (Only for MFC 6550MC/7550MC). If the printer
is online, the MFC can not print a test sample page.
<RESET>
When Reset is pressed together with Shift, it clears data from the memory. The
printer is also reset and restored to the factory default settings. The Reset switch
may be able to clear an error status and the Hex Dump mode. (See page 10-14.)
Remember that the Reset switch clears data from the printer memory.

Print Priority Key

When this key is first pressed, it puts the MFC exclusively in printer mode. All fax
data will be stored in the memory instead of printing on paper. When this key is
pressed again, and PC data is not being sent or the MFC has completed printing, it
will exit automatically from the print priority status. When the Print Priority key is
pressed, it increases the memory available for printing without decreasing memory
available for memory transmission and incoming faxes.
ERRORS>
USING THE MFC AS A PRINTER
10-5