The Auto Document Feeder (Adf) - Brother MFC-4550 Operation Manual

MFC 4550/6550MC/7550MC
OP-US-5.0
About the Documents You Send...
Do not use documents that are curled, wrinkled, folded, ripped, or that
contain staples, paper clips, paste, or tape. Also, do not use cardboard,
newspaper, or fabric.
curled
wrinkled

The Auto Document Feeder (ADF)

The Auto Document Feeder (ADF) automatically feeds documents (up to 30 pages)
into the machine, one at a time. The thickness and weight of the documents should
fall into the following categories:
Thickness: For one sheet: 2.8 x 10
For multiple sheets: 2.8 x 10
Weight: For one sheet: 0.07 x 10
For multiple sheets: 0.07 x 10
As a reference, please note that the paper used for this manual has the following
thickness and weight:
Thickness: 3.1 x 10
Weight: 0.091 x 10
Before inserting documents into the document feeder, fan the sheets of paper to make
sure the documents are not stuck together. Then tap the leading edge on a flat surface
so all the pages are even when placed in the feeder. Make sure you always place the
documents in face down.
DOCUMENT BASICS
NOTICE
folded
NO!
ripped
-3
to 4.7 x 10
-3
-3
to 0.121 x 10
-3
inches (0.08 mm)
-3 2 2
lbs/inch (64 g/m )
SENDING FAXES
staples
paper clip fabric
-3
inches (0.07 to 0.12 mm).
-3
to 3.9 x 10 inches (0.07 to 0.10 mm).
-3 2
lbs/inch (52 to 85 g/m
-3 -3
to 0.114 x 10 lbs/inch
tape
2
).
2 2
(52 to 80 g/m ).
5 - 2