Table of Contents
Advertisement
MFC 4550/6550MC/7550MC
OP-US-5.0
Printing the Call Back Message
You can print a sample Call Back Message to check the format.
KEYS TO PRESS
1 . Press Function.
(The MFC 4550 will skip to Step 4.)
2 . Wait for two seconds.
(Only for MFC 6550MC/7550MC)
3 . Press 1.
(Only for MFC 6550MC/7550MC)
4 . Press 3.
5 . Press 5.
6 . Press Start.
ECM (Error Correction Mode)
The Error Correction Mode (ECM) is a way for the MFC to check the integrity of a fax
transmission while it is in progress. ECM transmissions are possible only between
machines that both have the ECM feature. If they do, you may send and receive fax
messages that are continuously checked for their integrity.
Sufficient memory must be available in your machine for this feature to work.
Error Retransmission
Error Retransmission is helpful when the receiving machine does not have ECM.
Even though your machine can not check the integrity of the message, it will send the
affected page(s) again after occurrences of accidental noise have caused an error.
This feature is available only for memory transmission using Super Quick-
Scan (see page 5-8~13).
FAX TRANSMISSION OPTIONS
(Only for MFC
6550MC/
7550MC)
(Only for MFC
6550MC/
7550MC)
SENDING FAXES
THE DISPLAY WILL SHOW:
0 9 / 1 2 / 1 9 9 6
1 5 : 2 5
O N L I N E
ENTER
NO.
&
SET
1 . F A X
2 . P R I N T E R
1 . F A X
3 . P R I N T
R E P O R T S
5.CALL
BACK
MSG
PRESS
START
KEY
P R I N T I N G
5-26
Advertisement
Table of Contents
Troubleshooting
