C) Advanced Fax Transmissions; Sending A Fax By Using Super Quick-Scan (Memory Transmission); If You Get A Memory Full Message When Trying To Send A Fax By Using Super Quick-Scan - Brother MFC-4550 Operation Manual

MFC 4550/6550MC/7550MC
OP-US-5.0
C) ADVANCED

Sending a Fax by Using Super Quick-Scan (Memory Transmission)

If you are faxing a set of documents that are confidential in nature or you just need
your original documents back right away, you do not have to stand at the machine and
wait for the transmission of each page to be completed. You can use Super Quick-Scan
in order to get your original documents back before transmission.
KEYS TO PRESS
1 . Insert the documents into the feeder.
2 . Press Super Q.Scan.
The display will indicate how much memory is
available.
3 . Enter the fax number.
4 . Press Start to begin scanning the
documents
completed,the machine will dial the
destination.
If You Get a MEMORY FULL Message When Trying to Send a Fax
by Using Super Quick-Scan
If the memory becomes full when scanning page 1 and the display shows
PRESS STOP KEY, then press Stop to abort the job.
If the memory becomes full on page 2 or more of a multipage document, you
will be prompted to press Start to send the portion already scanned, or to
press Stop to abort the job.
ADVANCED FAX TRANSMISSIONS
FAX TRANSMISSIONS
into memory. Once
FOR YOUR INFORMATION
SENDING FAXES
THE DISPLAY WILL SHOW:
0 9 / 1 2 / 1 9 9 6 1 5 : 2 5
O N L I N E
FAX: NO. & START
S C A N R E A D Y
COPY: PRESS COPY
S C A N R E A D Y
MEMORY 100%
O N L I N E
ENTER FAX NO.
O N L I N E
NJ OFFICE
O N L I N E
MEMORY 100%
O N L I N E
5 - 8