Storing The One-Touch Dial Numbers - Brother MFC-4550 Operation Manual

MFC 4550/6550MC/7550MC
OP-US-5.0
TELEPHONE FUNCTION SETTINGS

Storing the One-Touch Dial Numbers

You can dial numbers automatically by storing telephone or fax numbers as One-
Touch dial numbers. You can also store names with the numbers so when you call, you
can verify the destination by the name on the display. You can store a maximum of
24 numbers. To access numbers 13 to 24, hold down the Shift key. For example, One-
Touch location "13" is accessed by pressing Shift and the "01" One-Touch key
simultaneously. Here is how to store a telephone number as a One-Touch dial
number:
KEYS TO PRESS
1 . Press Function.
(The MFC 4550 will skip to Step 4.)
2 . Wait for two seconds.
(Only for MFC 6550MC/7550MC)
3 . Press 1.
(Only for MFC 6550MC/7550MC)
4 . Press 4.
5 . Press 1.
6 . Press the One-Touch key where you want
to store a number.
Example: One - Touch 05.
Note: The One-Touch keys are not the
number keys.
7 . Enter a number (up to 20 digits).
Example: 14155551212.
8 . Press Set.
You then will be prompted to enter the
name or company associated with this
number.
9 . Enter the name by using the number
keys (up to 15 characters).
Example: NJ OFFICE.
(See page 2-10~12.)
3 - 6
THE DISPLAY WILL SHOW:
09/12/1996
O N L I N E
ENTER NO.
(Only for MFC
1 . F A X
6550MC/
2 . P R I N T E R
7550MC)
(Only for MFC
1 . F A X
6550MC/
7550MC)
4 . S E T A U T O D I A L
1.ONE-TOUCH
SELECT
* 0 5 :
E N T E R & S E T
* 0 5 : 1 4 1 5 5 5 5 1 2 1 2 _
N A M E :
E N T E R & S E T
NAME:NJ
15:25
& SET
DIAL
ONE-TOUCH
OFFICE