Setting Up Polled Waiting With Super Quick-Scan; Sequential Polling - Brother MFC-4550 Operation Manual

MFC 4550/6550MC/7550MC
OP-US-5.0
POLLING
11. Wait for two seconds.
1 2. Press Stop.
1 3. Enter the fax number.
Example: One-Touch dialing.
1 4. Press Start.
The MFC waits until the specified time to
c a l l .

Setting Up Polled Waiting with Super Quick-Scan

Before pressing Start, press Super Q.Scan so that you can store your Polled Waiting
document in the memory. If you use Super Q.Scan to place the Polled Waiting
documents into the memory, they will not be erased automatically after they are
polled. To erase them you must use the Cancel Job function. (See page 5-15.)

Sequential Polling

This function is the reverse of Broadcasting, in which your machine sends a document
to several destinations. In a sequential polling operation, your machine will request
documents from several fax units in a single operation.
After all the polling operations are finished, a Sequential Polling Report will be
printed automatically.
KEYS TO PRESS
1 . Make sure there are no documents in the
feeder.
2 . Press Function.
(The MFC 4550 will skip to Step 4.)
3 . Wait for two seconds.
(Only for MFC 6550MC/7550MC)
4 . Press 1.
(Only for MFC 6550MC/7550MC)
5 . Press 1.
7 - 5
1 . T I M E R
ENTER FAX
O N L I N E
PRESS START
O N L I N E
NJ OFFICE
O N L I N E
09/12/1996
O N L I N E
THE DISPLAY WILL SHOW:
09/12/1996
O N L I N E
ENTER NO.
(Only for MFC
1 . F A X
6550MC/
2 . P R I N T E R
7550MC)
(Only for MFC
1 . F A X
6550MC/
7550MC)
1 . T E M P . S E T T I N G S
NO.
KEY
15:25
15:25
& SET