Transmission Verification (Xmit) Report - Brother MFC-4550 Operation Manual

MFC 4550/6550MC/7550MC
OP-US-5.0
PRINTING REPORTS AND LISTS

Transmission Verification (Xmit) Report

The Transmission Verification Report can be used as proof that you sent a fax. It lists
the name or fax number of the receiving party, the time and date of transmission, and
whether the transmission was successful. The factory default setting is OFF.
OFF: The report will be printed automatically only if an error occurs during
transmission. If the report says "Result: NG" then send all the pages again. If
the report says "Result: Check readability of transmitted page(s) 02, 05" then
send only pages 2 and 5 again.
ON: A report will be printed automatically. It is important to read the result of each
report to check that the transmission was successful.
KEYS TO PRESS
1 . Press Function.
(The MFC 4550 will skip to Step 4.)
2 . Wait for two seceonds.
(Only for MFC6550MC/7550MC)
3 . Press 1.
(Only for MFC6550MC/7550MC)
4 . Press 3.
5 . Press 7.
6 . Press Z (left arrow) or X (right arrow)
to choose the setting.
Example: ON.
7 . Press Set.
8 . Press Stop to exit.
11-6
THE DISPLAY WILL SHOW:
09/12/1996
O N L I N E
ENTER NO.
(Only for MFC
1 . F A X
6550MC/
7550MC) 2 . P R I N T E R
(Only for MFC
1 . T E M P . S E T T I N G S
6550MC/
7550MC)
3.PRINT
7.XMIT REPORT
XMIT REPORT:OFF
SELECT {
XMIT REPORT:ON
7.XMIT REPORT
15:25
& SET
REPORTS
} & SET