Turning On The Message Center With 3 Basic Steps; Setting The Message Storage - Brother MFC-4550 Operation Manual

MFC 4550/6550MC/7550MC
OP-US-5.0
MESSAGE CENTER MODE SETTINGS

Turning on the Message Center with 3 Basic Steps

You can get started receiving messages by doing the following three steps.
1 . Set the Message Storage.
2 . Record the Outgoing Message (MSG CTR OGM).
3 . Activate the Message Center mode, by pressing the Mode button until both Fax
and F/T LEDs are lit.

Setting the Message Storage

Setting the Message Storage is the first step in turning on the Message Center Mode.
Before you set the Message Storage, make sure you carefully read "Mode Settings at
a Glance" (see page 9-2). Once you decide the mode that best suits your needs, follow
the steps below.
KEYS TO PRESS
1 . Press Function.
2. Wait for two seconds.
3 . Press 1.
4 . Press 8.
5 . Press 1.
6 . Press Z (left arrow) or X (right arrow)
repeatedly to select ON or OFF.
Example: FAX: ON.
9 - 6
GETTING STARTED
THE DISPLAY WILL SHOW:
09/12/1996 15:25
O N L I N E
ENTER NO. & SET
1 . F A X
2 . P R I N T E R
1 . F A X
8.SETUP MSG CTR
1.MSG STORAGE
F A X : O F F
SELECT { } & SET
F A X : O N