Parameterization; General Information - Bosch Rexroth IndraDyn T Project Planning Manual

232/261 Bosch Rexroth AG | Electric Drives
Operating Torque Motors
12.5

Parameterization

12.5.1

General Information

and Controls
Fig.12-1: General start-up procedure at synchronous torque motors
With DriveTop, entering or editing certain parameters and executing commands
during the commissioning process is done inside menu-driven dialogs or in list
representations. Optionally, it can also be performed via the control terminal.
Rexroth IndraDyn T | Project Planning Manual