5
Harness
1
2
5.1
Tools, Servicing Aids
Screwdriver – 0000 890 2300 or equivalent
–
Socket, T27x125 – 0812 542 2104 or equivalent
–
Torque wrench – 5910 890 0302 or equivalent
–
Screwdriver, T27x200 – 5910 890 2415 or equivalent
–
5.2
Removing the Harness
Preparations, @ 3.1.
N
Backplate with extension
Push the upper sliding adjusters of the harness straps
N
(1 and 5) through the openings in the backplate.
Backplate without extension
12
5
4
P5x14
(4 Nm /
35 lbf. in.)
3
P5x14
(4 Nm /
35 lbf. in.)
8
Insert screwdriver 0000 890 2300 through the
N
protective screen (see illustration) and use it to pull
the upper sliding adjusters (8) away from the harness
straps (1 and 5) and hold them there.
Pull out the straps (1 and 5).
N
All versions
Rotate the lower sliding adjusters of the harness
N
straps (1 and 5) through 90° and push them out
through the openings in the backplate.
Take out the screws (4).
N
Remove the straps (1 and 5).
N
Take out the screws (3).
N
Remove the waist belt (2).
N
6
7
P6x25
(6 Nm /
53 lbf. in.)
5
BR 800