Harness - Stihl SR 5600 Instruction Manual

4 Harness

► Tighten down the clamp screw (5) to secure
the control handle – see also "Adjusting the
Control Handle".
3.4 Fitting the Liquid Hose
► Slip hose clip over the end of the long hose.
► Push the liquid hose (1) onto the container's
stub and secure with a hose clip.
► Secure the liquid hose (1) to the pleated hose
with retainer (2).
1
0458-458-9321-C
5
1
2 1
► Slip hose clip over the end of the short hose.
► Push the liquid hose (1) onto the stub on the
metering unit and secure with a hose clip.
1 4
► Use hose clips (4) to secure hose (1) from the
container and hose (3) to the metering unit to
the stubs on the stop cock.
► Close the stop cock (lever at right angle to
control handle).
► Fill up with water and check all hose connec‐
tions for leaks.
3.5 Adjusting the Control Handle
1
► Put the unit on your back.
► Loosen the clamp screw (1).
► Move the control handle (2) along the tube to
the most comfortable position.
► Tighten down the clamp screw (1) firmly.
4 Harness
4.1 Attaching the Harness
► Attach strap hook to the backplate.
English
4 3
2
9