8.5
Installing the Fuel Pump
Push the fuel pump (5) into the filter housing (9) so
N
that it snaps into place.
Push the fuel hose (12) onto long connector on fuel
N
pump (5).
Install the filter housing and carburetor, @ 8.3.
N
8.6
Removing the Baffle
Preparations, @ 3.1.
N
Remove filter housing and carburetor, @ 8.2.
N
Take out the screw (1).
N
Remove the baffle (10).
N
8.7
Installing the Baffle
Position the baffle (10) against the filter housing.
N
Insert the screw (1) but do not tighten it down yet.
N
The following tightening sequence of screws (1) and (2)
must be observed to make sure the baffle (10) is properly
sealed after installation and the carburetor (7) is correctly
fitted, @ 8.3.
Install the filter housing and carburetor, @ 8.3.
N
22
BR 800