Adjusting The Throttle Cable; Fitting The Harness - Stihl BR 500 Instruction Manual

English

Adjusting the Throttle Cable

It may be necessary to correct the
adjustment of the throttle cable after
assembling the machine or after a
prolonged period of operation.
Adjust the throttle cable only when the
unit is completely and properly
assembled.
Set throttle trigger to the full throttle
N
position – as far as stop.
Carefully screw home the screw in
N
the throttle trigger until you feel
initial resistance.
10

Fitting the Harness

Adjust the harness straps so that
N
the backplate fits snugly and
securely against your back.
A Adjust height
B Adjust angle
Tightening the harness straps
Pull the ends of the straps
N
downward.
Loosening the harness straps
Lift the tabs of the sliding adjusters.
N
BR 500, BR 550, BR 600