Changing The Compressor Oil - Vanair Air N Arc All-in-One Power Systems 300 Operations Manual & Parts List

SECTION 6: MAINTENANCE
NOTE
This procedure should only be
performed when the compressor is warm
immediately after extended operation.
A
B
KEY
A COMPRESSOR DRAIN TUBE
B DRAIN CAP
C COMPRESSOR OIL FILL PORT
D COMPRESSOR OIL FILL CAP/DIPSTICK
E OPTIMAL OIL LEVEL INDICATION IS BETWEEN HOLES ON THE COMPRESSOR FILL DIPSTICK
PAGE - 72

6.5.5 CHANGING THE COMPRESSOR OIL

C
Figure 6-6: Compressor Oil Fill and Drain Tube Assembly
090010-OP_r0
®
AIR N ARC 300 SERIES ALL-IN-ONE POWER SYSTEM
During periodic maintenance
frequently if needed, it will be necessary to perform a
complete compressor system oil change. Follow the
procedure below, along with Figure 6-6 and Section
6.5.3, to change the oil.
TOOLS
NEEDED
Strap Wrench
Adjustable
Wrench
Oil Pan Oil Filter Element No. 266801
D
DESCRIPTION
intervals, or
REPLACEMENT PART(S)
®
Vanair Vanguard™
Premium Synthetic Oil No.
264626-1/2GAL
Air/Oil Coalescer Element
No. 264154-109
E
®
more