Instrumentation - Vanair Air N Arc All-in-One Power Systems 300 Operations Manual & Parts List

®
AIR N ARC 300 SERIES ALL-IN-ONE POWER SYSTEM
fitted with a keyed fan.

2.6 INSTRUMENTATION

This section describes the basic functions of the controls
located on the instrument panel. To insure that the
controls are engaged correctly, Consult the various
operating procedures as described in Section 5,
Operation, and Appendix B.
System Component or
Component Group
INSTRUMENTATION
Volts/Amps Meter
Welder Function Switches
DC Charger Mode Toggle Switch
Volts/Amps Manual Adjustment Dial
Compressor ON/OFF Toggle Switch
Compressor Air Pressure Switch/
Gauge
Weld Lead Junction
Battery Cable Receptacle
Generator Control ON/OFF Toggle
Switch
®
KEY DESCRIPTION
A PRIMARY FUEL FILTER (70 micron)
B SECONDARY FUEL FILTER (10 micron)
Figure 2-12: Engine Fuel Filters
Manual Location
Section
2.6
2.6.1
2.6.2
2.6.3
2.6.4
2.6.5
2.6.6
2.6.7
2.6.8
2.6.9
090010-OP_r0
A
page 27
page 28
page 28
page 28
page 28
page 30
KEY
A DC WELDER GENERATOR
page 30
B AC GENERATOR
page 30
page 30
Figure 2-13: Generator Assembly
page 30
SECTION 2: DESCRIPTION
B
A
B
DESCRIPTION
PAGE - 27