Instrument Panel - Compressor Off Function - Vanair Air N Arc All-in-One Power Systems 300 Operations Manual & Parts List

APPENDIX B: INSTRUMENT PANEL FUNCTIONS
B.3.1 INSTRUMENT PANEL - COMPRESSOR OFF FUNCTION
A
B
FUNCTION/ACTION
Compressor Switch
1
I
OFF
I
The starting condition for operating the compressor begins after the engine state is in the pre-existing
RUN condition, as explained in Section B.2.4, Key to Run Function.
PAGE - 170
AIR N ARC
D
D
SUSTAINED OR RESPONSE CONDITION
A
Hour meter constantly displays total hours; fuel level meter con-
tinues to display.
B The ignition position is ON, with the engine operating in low
idle.
C Air pressure gauge may or may not read pressure indication
(depending upon compressor status when previously shut off).
D No condition LEDs will be on.
090010-OP_r0
®
300 SERIES ALL-IN-ONE POWER SYSTEM
C
®
D
1