Instrument Panel - Welder/Charger Off Function - Vanair Air N Arc All-in-One Power Systems 300 Operations Manual & Parts List

APPENDIX B: INSTRUMENT PANEL FUNCTIONS
B.4.1 INSTRUMENT PANEL - WELDER/CHARGER OFF FUNCTION
A
FUNCTION/ACTION
DC Welder/Charger
1
and DC Charger Mode
selector switches are
in the OFF position
I
The starting condition for operating the DC Welder/Charger begins after the engine state is in the pre-
existing RUN condition, as explained in Section B.2.4, Key to Run Function. The DC Charger Mode
selector switch defaults to the 12V position for its "off" position.
NOTE: After initiation of the module, no condition lights will be illuminated, and the display will be blank.
PAGE - 172
B
SUSTAINED OR RESPONSE CONDITION
A
Hour meter constantly displays total hours; fuel level meter con-
tinues to display.
B The CC/CV selector switch will be in either position, but will not
I
affect the display.
090010-OP_r0
®
AIR N ARC 300 SERIES ALL-IN-ONE POWER SYSTEM
1
®