Section 6: Maintenance; General Information; Routine Maintenance Schedule; Maintenance Schedule Table - Vanair Air N Arc All-in-One Power Systems 300 Operations Manual & Parts List

®
AIR N ARC 300 SERIES ALL-IN-ONE POWER SYSTEM

SECTION 6: MAINTENANCE

6.1 GENERAL INFORMATION

A strict maintenance program is the key to long life for the
Air N Arc 300 Series All-In-One Power System package.
Below is a program that, when adhered to, should keep
the package in top operating condition. Refer to Section
6.5, Parts Replacement and Adjustment Procedures
in this section of the manual for detailed descriptions of
specific compressor system components. The following
table lists the main topics in order of appearance for this
section:
System Component or
Component Group

Routine Maintenance Schedule

Maintenance Schedule Table

Replacement Parts
Parts Replacement and Adjustment
Procedures
Servicing the System Fuses and Cir-
cuit Breakers
Extreme Condition Operation
Storage and Intermittent Use
6.2 ROUTINE MAINTENANCE
SCHEDULE
®
Vanair Manufacturing, Inc. considers the maintenance
schedule given in Section 6.3, Maintenance Schedule
Table, to be part of the warranty agreement with the
customer. This maintenance regimen must be followed in
order to protect the warranty of the machine package.
Vanair Manufacturing, Inc. especially requires that a
consistent service regimen be established for engine oil
changes, and engine and compressor air filter servicing.
The following schedule is designed so that many of the
other maintenance tasks are completed when the engine
®
Manual Location
Section
6.2 page 57
6.3 page 59
6.4 page 63
6.5 page 63
6.6 page 94
6.7 page 95
6.8 page 98
090010-OP_r0
SECTION 6: MAINTENANCE
WARNING
DO NOT remove caps, plugs and/or other
components when compressor is
running or pressurized. Stop
compressor and de-pressurize system
prior to maintenance of system.
Wear personal protective equipment
such as gloves, work boots, and eye and
hearing protection as required for the
task at hand.
WARNING
Follow all applicable safety
recommendations as outlined in Section
1: Safety of this manual.
NOTE
Operating the machine package in a
severe environment may require more
frequent service intervals.
PAGE - 57