Replacement Parts; Parts Replacement And Adjustment Procedures - Vanair Air N Arc All-in-One Power Systems 300 Operations Manual & Parts List

®
AIR N ARC 300 SERIES ALL-IN-ONE POWER SYSTEM

6.4 REPLACEMENT PARTS

Replacement parts should be purchased through your
local Vanair representative or where the 300 Series
Power System was purchased. If, for any reason, parts
are not available in this manner, they can be purchased
through Vanair directly.
For assistance when ordering new
replacement parts, consult Section 9.1,
Parts Ordering Procedure, and Table 9A:
Recommended Spare Parts List.
VANAIR MANUFACTURING, INC.
10896 West 300 N.
Michigan City, IN 46360
Telephone: (800) 526-8817
Service Fax: (219) 879-5335
Parts Fax: (219) 879-5340
Sales Fax: (219) 879-5800
www.vanair.com
If additional spare parts are being stored
for future use, make certain that they are
stored in proper containers that allow for
protection against contamination, and
kept in a clean area of moderate
temperature reading. For information on
storing the machine package for periods
of non-use, consult Section 6.8.2, Long
6.5 PARTS REPLACEMENT AND
ADJUSTMENT PROCEDURES
System Component or
Part Group Task
Parts Replacement and Adjust-
ment Procedures
NOTE
(219) 879-5100
NOTE
Term Storage.
Manual
Section
6.5
Continued on next page
090010-OP_r0
®
Location
Relieve pressure from the compressor
system before removing any
components. The compressor and
page 63 engine oil levels should be checked with
the unit shut down and the oil allowed to
SECTION 6: MAINTENANCE
WARNING
properly settle.
PAGE - 63