Instrument Panel - Key To Start Function - Vanair Air N Arc All-in-One Power Systems 300 Operations Manual & Parts List

APPENDIX B: INSTRUMENT PANEL FUNCTIONS
B.2.3 INSTRUMENT PANEL - KEY TO START FUNCTION
A
1
2
FUNCTION/ACTION
1 Key to START (Crank)
2 The key automatically
reverts back to the ON
position when
released.
I
This particular condition/response's affects are observed elsewhere on the machine and not on the panel.
PAGE - 168
AIR N ARC
C
C
C
SUSTAINED OR RESPONSE CONDITION
A Hour meter remains constantly displaying total hours; fuel level
meter continues to display.
The engine cranks and starts up. It will come to an elevated
I
B
RPM for about three (3) seconds and return to idle.
C All of the weld/generator LEDs and display will remain lit for
approximately ten (10) seconds as the module initializes, then
will go out.
090010-OP_r0
®
300 SERIES ALL-IN-ONE POWER SYSTEM
®
C