Vanair Air N Arc All-in-One Power Systems 300 Operations Manual & Parts List page 128

SECTION 7: TROUBLESHOOTING
7.2 TROUBLESHOOTING GUIDE
Fault/Malfunction
No AC generator output
(continued)
Low AC voltage
High AC voltage
PAGE - 110
AIR IN ARC
Possible Cause
AC GENERATOR
Loose or faulty wiring
Circuit breaker blown
Engine speed too low for demand
Engine speed too high for demand
090010-OP_r0
®
300 SERIES ALL-IN-ONE POWER SYSTEM
Corrective Action
Check wiring: Loose—secure ;
faulty—replace.
Replace the circuit breaker. Refer to
Section 6.6, Servicing the System Fuses
and Circuit Breakers
Adjust speed control. Consult Section
6.5.14, Adjusting the Engine Speed, and
the Engine Operator's Manual.
Adjust speed control. Consult Section
6.5.14, Adjusting the Engine Speed, and
the Engine Operator's Manual.
®