Figure 40 Redundant Psu Cage Assembly; Figure 41 Redundant Psu Cage Installation - Chenbro RM245 Series User Manual

RM245 Series

Figure 40 Redundant PSU Cage Assembly

1. Attach PSU bracket to PSU cage (left side), and secure it with two screws.
2. Attach PSU bracket to PSU cage (rear side), and secure it with two screws.
3. Install the PSU Cage into the chassis, and ensure the alignment screw holes and bracket match.
Installation
Figure 41 Redundant PSU Cage
4. Secure the PSU cage with four screws as shown.
5. Secure the PSU cage with two screws as shown.
/ Installation 36
│