Table of Contents
Advertisement
SR209 Plus Series
2-5 Optional Fan (Add-In-Card Area) Installation
Figure 25 Optional fan installation
1. Attach the fan with the tool-less fan holder (as shown).
2. Insert the fan module into the reserved fan slot as shown.
NOTE:
Please notice the arrow on the fan holder pointing the rear.
3. Plug the power connector into the system board.
Figure 26 Optional fan removal
1. Unplug the power connector.
2. Release the fan latch and pull the fan out.
3. Remove the tool-less fan holder as shown and replace the fan.
24
│
Advertisement
Table of Contents
