Figure 12 Front Top Cover Installation; Figure 13 Rear Top Cover Installation - Chenbro RM437 Series User Manual

RM437 Series

Figure 12 Front Top Cover Installation

1. Align the guide pins of the front top cover with the grooves on the chassis base.
2. Slide the cover toward the front panel until it is locked into place.

Figure 13 Rear Top Cover Installation

1. Align the guide pins of the rear top cover with the grooves on the chassis base.
2. Keep the latch lifted up, install the cover vertically as shown and press down the latch to lock.
3. Secure with two screws as shown.
System Components Removal and Installation|21