Table of Contents
Advertisement
1-8 System Packaging
The original Chenbro packaging, where the server system is delivered, is designed to provide protection to a fully configured system
and tested to meet ISTA (International Safe Transit Association) Test Procedure 1A. The packaging is also designed to be re-used for
shipment after system integration has been completed.
The original packaging includes –the shipping box, and various protective inner packaging components, which are designed to
function together as a protective packaging system. When reused, all of the original packaging material must be used, including box
and each inner packaging component. In addition, all inner packaging components MUST be re-installed in the proper location to
ensure adequate protection of the system for subsequent shipment.
Part Number
387-20969-2100A0
NOTE:
The design of the inner packaging components does not prevent improper placement within the packaging assembly.
There is only one correct packaging assembly that will allow the package to meet the ISTA (International Safe Transit Association)
Test Procedure 1A (2008). Failure to follow the specified packaging assembly instructions may result in damage to the system
during shipment.
Product
Unpackaged Net Weight
SR209 Plus
NOTE:
A L5 system does not include motherboard, processors, memory, drives, or add-in cards. It is the system
configuration as shipped from Chenbro. Weights of integrated system (system configurations that include the items
above) will vary depending on the final system configuration.
Table 4
System packing information
Single/Bulk
Single
Table 5
Packaged Gross Weight
（kg）
7.8
Form Factor (mm)
350 x 734 x 820
Product weight information
Unpackaged Net Weight
（kg）
9 17.18
SR209 Plus Series
Support Level
L5
Packaged Gross Weight
(lb)
9.8
(lb)
21.59
14
│
Advertisement
Table of Contents
