How To Perform A Factory Reset - Cisco Catalyst 9400 System Management Configuration Manual

How to Perform a Factory Reset

core files, and credentials such as Federal Information Processing Standard-related (FIPS-related) keys. The
erasure is consistent with the clear method, as described in NIST SP 800-88 Rev. 1.
After a factory reset is completed, the device returns to its default license configuration.
The factory reset process is used in the following scenarios:
• Return Material Authorization (RMA) for a device: If you have to return a device to Cisco for RMA,
• Recovering a compromised device: If the key material or credentials that are stored on a device are
During a factory reset, the device reloads and enters ROMMON mode. After the factory reset, the device
removes all its environment variables, including the MAC_ADDRESS and the SERIAL_NUMBER variables,
which are required to locate and load the software. Perform a reset in ROMmon mode to automatically set
the environment variables. The BAUD rate environment variable returns to its default value after a factory
reset. Make sure that the BAUD rate and the console speed are the same at all times. Otherwise, the console
becomes unresponsive.
After the system reset in ROMmon mode is complete, add the Cisco IOS image either through an USB or
TFTP.
The following table provides details about the data that is erased and retained during the factory reset process:
Table 30: Data Erased and Retained During Factory Reset
Data Erased
All Cisco IOS images, including the current boot
image
Crash information and logs
User data, startup and running configuration, and
contents of removable storage devices, such as Serial
Advanced Technology Attachment (SATA), Solid
State Drive (SSD), or USB
Credentials such as FIPS-related keys
Onboard Failure Logging (OBFL) logs
ROMmon variables added by a user.
Licenses
How to Perform a Factory Reset
To perform a factory reset, complete this procedure:
System Management Configuration Guide, Cisco IOS XE Bengaluru 17.4.x (Catalyst 9400 Switches)
340
remove all the customer-specific data before obtaining an RMA certificate for the device.
compromised, reset the device to the factory configuration, and then reconfigure the device.
Data Retained
Data from remote field-replaceable units (FRUs)
Value of the configuration register.
—
Credentials such as Secure Unique Device Identifier
(SUDI) certificates, and public key infrastructure
(PKI) keys.
—
—
Performing Factory Reset