Removing And Returning An Authorization Code - Cisco Catalyst 9400 System Management Configuration Manual

Removing and Returning an Authorization Code

Step 5
Step 6
Step 7
Step 8
Step 9
Removing and Returning an Authorization Code
To remove and return an SLR authorization code, complete the following steps.
Before you begin
Supported topologies: all
Procedure
Step 1
Step 2
System Management Configuration Guide, Cisco IOS XE Bengaluru 17.4.x (Catalyst 9400 Switches)
154
Command or Action
call-home
Example:
Device(config)# call-home
http-proxy proxy-address proxy-port
port-number
Example:
Device(config-call-home)# http-proxy
198.51.100.10 port 5000
exit
Example:
Device(config-call-home)# exit
exit
Example:
Device(config)# exit
copy running-config startup-config
Example:
Device# copy running-config
startup-config
Command or Action
enable
Example:
Device> enable
show license summary
Example:
Device# show license summary
Smart Licensing Using Policy
Purpose
Enters Call Home configuration mode.
Configures the proxy server information to the
Call Home service.
Exits Call Home configuration mode and enters
global configuration mode.
Exits global configuration mode and enters
privileged EXEC mode.
Saves your entries in the configuration file.
Purpose
Enables privileged EXEC mode. Enter your
password, if prompted.
Ensure that the license that you want to remove
and return is not in-use. If it is in-use, you must
first disable the feature.