Additional References For Performing Device Setup; Feature History For Performing Device Setup Configuration - Cisco Catalyst 9400 System Management Configuration Manual

Performing Device Setup Configuration
Device# reload at 19:30
Reload scheduled for 19:30:00 UTC Wed Jun 5 2013 (in 2 hours and 25 minutes)
Proceed with reload? [confirm]
This example shows how to reload the software on a device at a future date and time:
Device# reload at 02:00 jun 20
Reload scheduled for 02:00:00 UTC Thu Jun 20 2013 (in 344 hours and 53 minutes)
Proceed with reload? [confirm]

Additional References For Performing Device Setup

Related Documents
Related Topic
Device setup commands
Boot loader commands
Hardware installation

Feature History for Performing Device Setup Configuration

This table provides release and related information for features explained in this module.
These features are available on all releases subsequent to the one they were introduced in, unless noted
otherwise.
Release
Cisco IOS XE Everest 16.6.1
Use Cisco Feature Navigator to find information about platform and software image support. To access Cisco
Feature Navigator, go to http://www.cisco.com/go/cfn.
Feature
Device Setup
Configuration
System Management Configuration Guide, Cisco IOS XE Bengaluru 17.4.x (Catalyst 9400 Switches)
Additional References For Performing Device Setup
Document Title
Command Reference (Catalyst
9400 Series Switches)
Cisco Catalyst 9400 Series
Switches Hardware Installation
Guide
.
Feature Information
A device setup configuration can be performed,
including auto configuration of IP address
assignments and DHCP.
87