Example: Rtu Licensing To Smart Licensing Using Policy - Cisco Catalyst 9400 System Management Configuration Manual

Smart Licensing Using Policy

Example: RTU Licensing to Smart Licensing Using Policy

Figure 11: Smart Licensing to Smart Licensing Using Policy: UDI and License Usage under Active Product Instance
Reporting After Migration
The product instance sends the next RUM report to CSSM, based on the policy.
If you want to change your reporting interval to report more frequently: on the product instance, configure
the license smart usage interval command. For syntax details see the license smart (global config) command
in the Command Reference for the corresponding release.
Example: RTU Licensing to Smart Licensing Using Policy
The following is an example of a Cisco Catalyst 9300 switch migrating from Right-to-Use (RTU) Licensing
to Smart Licensing Using Policy. This is a set-up with an active and members.
RTU Licensing is available on Cisco Catalyst 9300, 9400, and 9500 Series Switches until Cisco IOS XE Fuji
16.8.x. Smart Licensing was introduced starting from Cisco IOS XE Fuji 16.9.1.
System Management Configuration Guide, Cisco IOS XE Bengaluru 17.4.x (Catalyst 9400 Switches)
124