Back Panel; Factory Reset Button; Ports And Status Indicators - Cisco Meraki MS225 Series Installation Manual

MS225-24 Series front panel
MS225-48 Series front panel

Back Panel

MS225 Series back panel

Factory Reset Button

If the button is pressed and held for at least five seconds and then released, the switch will reboot and be restored to its
original factory settings by deleting all configuration information stored on the unit.

Ports and Status Indicators

The MS uses LEDs to inform the user of the device's status. When the device powers on, all the Internet LEDs flash
twice. Additional functions are described below, from left to right.
Front Panel Components
Function
Power
Restore
LED Status
Solid orange
Flashing white
Solid white
Off
N/A
Meaning
Switch is unable to connect to the Meraki cloud
Firmware upgrade in process
Switch is fully operational and connected to the Meraki cloud
Switch does not have power
Restore button to clear switch IP and local configuration settings
3