Cisco Catalyst 9400 System Management Configuration Manual page 206

Flow Record 2 - Bidirectional Flow Record
Flow Record 2 - Bidirectional Flow Record
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
System Management Configuration Guide, Cisco IOS XE Bengaluru 17.4.x (Catalyst 9400 Switches)
188
Command or Action
Device# show flow record
Command or Action
configure terminal
Example:
Device# configure terminal
flow record flow_record_name
Example:
Device(config)# flow record fr-wdavc-1
description description
Example:
Device(config-flow-record)# description
fr-wdavc-1
match ipv4 version
Example:
Device(config-flow-record)# match ipv4
version
match ipv4 protocol
Example:
Device(config-flow-record)# match ipv4
protocol
match application name
Example:
Device(config-flow-record)# match
application name
match connection client ipv4 address
Example:
Device(config-flow-record)# match
connection client ipv4 address
match connection client transport port
Example:
Device(config-flow-record)# match
connection client transport port
Configuring Application Visibility and Control in a Wired Network
Purpose
Purpose
Enters global configuration mode.
Enters flow record configuration mode.
(Optional) Creates a description for the flow
record.
Specifies a match to the IP version from the
IPv4 header.
Specifies a match to the IPv4 protocol.
Specifies a match to the application name.
This action is mandatory for AVC
Note
support, as this allows the flow to
be matched against the application.
Specifies a match to the IPv4 address of the
client (flow initiator).
(Optional) Specifies a match to the connection
port of the client as a key field for a flow
record.