Workflow For Topology: Cslu Disconnected From Cssm - Cisco Catalyst 9400 System Management Configuration Manual

Workflow for Topology: CSLU Disconnected from CSSM

Enable NETCONF. Cisco DNA Center uses the NETCONF protocol to provision configuration and
retrieve the required information from the product instance - the product instance must therefore have
NETCONF enabled, to facilitate this.
For more information, see the
In the guide, go to Model-Driven Programmability > NETCONF Protocol.
2. Cisco DNA Center Configuration
Where tasks is performed: Cisco DNA Center GUI
An outline of the tasks you must complete and the accompanying documentation reference is provided
below. The document provides detailed steps you have to complete in the Cisco DNA Center GUI:
a. Set-up the Smart Account and Virtual Account.
b. Add the required product instances to Cisco DNA Center inventory and assign them to a site.
Result:
After you implement the topology, you must trigger the very first ad hoc report in Cisco DNA Center, to
establish a mapping between the Smart Account and Virtual Account, and product instance. See the
DNA Center Administrator Guide
Resource Utilization Details to CSSM. Once this is done, Cisco DNA Center handles subsequent reporting
based on the reporting policy.
If multiple policies are available, Cisco DNA Center maintains the narrowest reporting interval. You can
change this, but only to report more frequently (a narrower interval). See the
Guide
If you want to change the license level after this, see the
release (Release 2.2.2 onwards) > Manage Licenses > Change License Level.
Workflow for Topology: CSLU Disconnected from CSSM
Depending on whether you want to implement a product instance-initiated or CSLU-initiated method of
communication. Complete the corresponding table of tasks below.
•
•
System Management Configuration Guide, Cisco IOS XE Bengaluru 17.4.x (Catalyst 9400 Switches)
114
Enter the same log in credentials that you use to log in to the CSSM Web UI. This enables Cisco DNA
Center to establish a connection with CSSM.
See the Cisco DNA Center Administrator Guide
Manage Licenses > Set Up License Manager.
This enables Cisco DNA Center to push any necessary configuration, including the required certificates,
for Smart Licensing Using Policy to work as expected.
See the
Cisco DNA Center User Guide
Your Network Topology > Assign Devices to a Site.
of the required release (Release 2.2.2 onwards) > Manage Licenses > Modify License Policy.
Tasks for Product Instance-Initiated Communication
Tasks for CSLU-Initiated Communication
Programmability Configuration Guide, Cisco IOS XE Amsterdam
of the required release (Release 2.2.2 onwards) >
of the required release (Release 2.2.2 onwards) > Display
of the required release (Release 2.2.2 onwards) > Manage Licenses > Upload
Cisco DNA Center Administrator Guide
Smart Licensing Using Policy
17.3.x.
Cisco
Cisco DNA Center Administrator
of the required