Cisco Catalyst 9400 System Management Configuration Manual page 163

Smart Licensing Using Policy
Step 11
Step 12
Step 13
Step 14
Step 15
Command or Action
username name privilege level password
password
Example:
Device(config)# username admin privilege
15
password 0 lab
interface interface-type-number
Example:
Device (config)# interface
gigabitethernet0/0
vrf forwarding vrf-name
Example:
Device(config-if)# vrf forwarding
Mgmt-vrf
ip address ip-address mask
Example:
Device(config-if)# ip address
192.168.0.1 255.255.0.0
negotiation auto
Example:
Device(config-if)# negotiation auto
System Management Configuration Guide, Cisco IOS XE Bengaluru 17.4.x (Catalyst 9400 Switches)
Ensuring Network Reachability for CSLU-Initiated Communication
Purpose
that a duplicate of the username you are going
to create in the next step does not exist.
If you plan to use REST APIs for
CSLU-initiated retrieval of RUM reports, you
have to log in to CSLU. Duplicate usernames
may cause the feature to work incorrectly if
there are duplicate usernames in the system.
(Required) Establishes a username-based
authentication system.
The privilege keyword sets the privilege level
for the user. A number between 0 and 15 that
specifies the privilege level for the user.
The password allows access to the name
argument. A password must be from 1 to 25
characters, can contain embedded spaces, and
must be the last option specified in the
username command.
This enables CSLU to use the product instance
native REST.
Note Enter this username and password
in CSLU
Reports: CSLU Initiated, on page
→ Step 4. f. CSLU can then
141
collect RUM reports from the
product instance.
Enters interface configuration mode and
specifies the Ethernet interface, subinterface,
or VLAN to be associated with the VRF.
Associates the VRF with the Layer 3 interface.
This command activates multiprotocol VRF
on an interface
Defines the IP address for the VRF.
Enables auto-negotiation operation for the
speed and duplex parameters of an interface.
(Collecting Usage
145