Western Digital OpenFlex Data24 EcoDesign Manual page 8

EcoDesign Disclosures
b. Pull down slightly on the release handle to unseat the Drive Assembly. Then pull the handle
to remove the Drive Assembly from the enclosure:
Figure 2: Drive Assembly Removal
c. Repeat these steps to remove the remaining Drive Assemblies.
Step 4 : Uninstall the Power Supply Units (PSUs).
a. At the rear of the enclosure, grasp the ring handle of a Power Supply Unit (PSU) with your
index finger, and use your thumb to press the latch release with a pinching motion:
Figure 3: Power Supply Unit (PSU) Release Latch Operation
b. Pull the Power Supply Unit (PSU) out of its slot:
1. EU EcoDesign Disclosures
1.4 Chassis Disassembly
4