EcoDesign Disclosures
Figure 36: PDB-B Removal
Step 16 : Remove power distribution board (PDB) A.
a. Using a T10 Torx screwdriver, remove the two (2) screws holding PDB-A to the side of the
Chassis. The screws are accessed through holes in the side panel of the bay for IO Module
(IOM) A:
Figure 37: PDB-A Screw Locations
b. Using a T10 Torx screwdriver, remove the four (4) screws holding PDB-A to the midplane:
1. EU EcoDesign Disclosures
1.4 Chassis Disassembly
21