Western Digital OpenFlex Data24 EcoDesign Manual page 37

EcoDesign Disclosures
Figure 56: IO Module (IOM) Riser PCB Screw Locations
Step 8 : Lift the IO Module (IOM) riser PCB to remove it from the PCIe support bracket:
Figure 57: IO Module (IOM) Riser PCB Removal
Step 9 : Using a T10 Torx screwdriver, remove the six (6) screws holding the IO Module (IOM) PCB to the
IO Module (IOM) cannister base:
1. EU EcoDesign Disclosures
1.5 IO Module (IOM) Disassembly
33