Western Digital OpenFlex Data24 EcoDesign Manual page 24

EcoDesign Disclosures
Figure 34: PDB-B Screw Locations
b. Using a T10 Torx screwdriver, remove the four (4) screws holding PDB-B to the midplane:
Figure 35: PDB-B Screw Locations
c. Carefully pull PDB-B upward to separate it from its connector on the midplane and remove it
from the Chassis:
Caution: To prevent damage to the PDB leads and midplane connector, do
not twist or torque the PDB when removing it from the midplane.
1. EU EcoDesign Disclosures
1.4 Chassis Disassembly
20