Western Digital OpenFlex Data24 EcoDesign Manual page 10

EcoDesign Disclosures
Figure 6: IO Module (IOM) Release Handle Operation
c. Use the handle to pull the IO Module (IOM) out of the enclosure:
Figure 7: IO Module (IOM) Removal
d. Repeat these steps to remove the remaining IO Module (IOM).
Step 6 : Remove the rear chassis cover.
a. Using a T7 Torx screwdriver, remove the sixteen (16) screws securing the rear chassis cover:
1. EU EcoDesign Disclosures
1.4 Chassis Disassembly
6