Western Digital OpenFlex Data24 EcoDesign Manual page 36

EcoDesign Disclosures
Step 6 : Carefully pull each AIC upward to separate its leads from the connector on the IO Module (IOM)
riser PCB:
Figure 55: AIC Removal
Step 7 : Using a T10 Torx screwdriver, remove the three (3) screws holding the IO Module (IOM) riser PCB
to the PCIe support bracket:
Caution: To prevent damage to the cards and connectors, do not twist or torque
the cards when removing them.
1. EU EcoDesign Disclosures
1.5 IO Module (IOM) Disassembly
32