Western Digital OpenFlex Data24 EcoDesign Manual page 33

EcoDesign Disclosures
Figure 51: IO Module (IOM) Cannister Cover Removal
Step 3 : Using a T10 Torx screwdriver, loosen/remove the three (3) screws securing the PCIe support
bracket to the IO Module (IOM) PCB. Two of the screws are captive; one is not.
Warning: Loosening/removing the screws will free the bracket from the IO Module
(IOM) PCB. However, the connectors will still be attached and could be damaged if
not handled safely.
1. EU EcoDesign Disclosures
1.5 IO Module (IOM) Disassembly
29