Western Digital OpenFlex Data24 EcoDesign Manual page 21

EcoDesign Disclosures
Figure 28: Rear System LED PCBA Removal
Step 13 : Remove the fan bracket.
a. Using a T7 Torx screwdriver, remove the eight (8) screws from midway along both sides of
the Chassis, and remove the eight (8) screws from the inside-bottom of the fan bracket (16
screws total):
Figure 29: Fan Bracket Screw Locations
b. Lift the fan bracket to remove it from the Chassis:
Note: Removing the fan bracket and IOM bulkhead will allow access to the
midplane and PDBs.
1. EU EcoDesign Disclosures
1.4 Chassis Disassembly
17