EcoDesign Disclosures
Figure 30: Fan Bracket Removal
Step 14 : Remove the IOM bulkhead.
a. Using a T7 Torx screwdriver, remove the two (2) screws from inside the bay for IO Module
(IOM) B:
Figure 31: IOM-B Bulkhead Screw Locations
b. Using a T7 Torx screwdriver, remove the two (2) screws from inside the bay for IO Module
(IOM) A:
1. EU EcoDesign Disclosures
1.4 Chassis Disassembly
18