Opex Perfect Pick Cortex Operator's Manual page 68

each container. The scanned information is used to determine in which
container to place the picked parts.
Scanner
Figure 4-14: Container scanner
7. The WUI identifies the location of the container on the workstation conveyor
where the user needs to place the picked part. In Figure 4-15, there are
four available locations which are identified by the PTL bar. The light bar
uses color-coded buttons to assist in identifying the correct container. In the
example in Figure 4-15, the second container has a magenta light, and the
third container has a blue light. If the first container was completed, it would
be transferred to the back conveyor and move on for further processing,
such as the addition of items from another area, QC monitoring, or to have
68 Operation
Perfect Pick® Cortex™ Operator Manual
OPEX Corporation