Opex Perfect Pick Cortex Operator's Manual page 70

8. Pick the quantity identified in the interface, and place it into the appropriate
container on the Workstation. In the example in Figure 4-16, 10 items
should be placed into the first container on the Workstation.
Quantity
Depending on your operation, you might also have to bag the items and
place a label on the bag (a labeler is shown in
9. Figure 4-17 shows an example where 32 items are needed for the first
container, and one is needed for the second container. These quantities are
70
Figure 4-16: Place the item in the container
Perfect Pick® Cortex™ Operator Manual
OPEX Corporation
Place item(s) into
identified location
Figure 4-15 on page 69).
Operation