Opex Perfect Pick Cortex Operator's Manual page 71

identified both on the monitor and the PTL bar. Put the selected quantity in
the correct container(s).
Quantities shown
in PTL bar
10. Press the color-coded PTL bar button. This tells the system that you've
picked the part, and the iBOT will exit the picking station, returning the tote
to the storage section.
Note: In cases like the example in Figure 4-17, where the same item is
needed in more than one container, add the item(s) to the container
identified in the WUI first. When all items have been added to that
container, press its colored button on the light bar. In this example, it is the
blue button. The monitor then points to the next container that needs the
Operation
Figure 4-17: Displaying the quantity needed
Perfect Pick® Cortex™ Operator Manual
OPEX Corporation
Quantities identified
in Workstation UI
71